HYBRIDECK PRODUCTS

HYBRIDECK has been formulated especially for Australian and New Zealand high UV conditions. It has been extensively tested by the Building Research Association of New Zealand in conjunction with CSIRO in Australia. The testing includes from accelerated weathering and UV xenon arc exposure (equivalent of 15 years ) to testing of quality control systems throughout the whole supply chain.

Made from 60% waste timber fibre and 30% recycled HDPE plastic, HYBRIDECK also has additives of colour, UV protectants and mould inhibiters. The materials are heated, pressurised and extruded into the shape of the decking. HYBRIDECK has no formaldehyde and no harmful timber treatments. At only 30% plastic content Hybridecks formula is specifically suited to our high UV conditions and is less likely to expand and contract as do those composites with 50% plastic content. Supported by well designed accessories and available in four profiles and three colours there is a deck for everyone.

Colours available
	MID GREY A classy emulation of weathered off timber – without the warping or twisting.
	RED BROWN Mimics kwila/merbau without the leaching of colour.
	CEDAR BROWN Replicates the warm gingery tones of Cedar.

The Planks


	SOLID Residential 130mm x 19mm x 4850mm (Longer lengths available in Australia) Our most popular profile in both Australia and New Zealand Can be used in all residential decking situations with either the concealed fixing system or predrilled and top fixed as for traditional decking. Available in all three colours ( Red Brown NZ only) Cover - 135mm Lineal m per m2 - 7.4m Max Joist Spacings - 400mm Fixers required per m2 with Max joist spacing - 18.5 >>Click here for fixing instructions

	SOLID Commercial 140mm x 25mm x 4850mm Used most often in conjunction with the previously available Hollow 146x23mm profile as an edge board under top fixed balustrading, or as public viewing platforms. Also used with either the concealed fixing system or predrilled and top fixed as for traditional decking. Available in all three colours (may require forward ordering). Cover - 145mm Lineal m per m2 - 7.0m Max Joist Spacings - 600mm Fixers required per m2 with Max joist spacing - 11.7 >>Click here for load testing report

The Accessories

	Fixing Clips Made from recycled HDPE, available in two sizes SOLID size for the 130x19mm SOLID RESIDENTIAL and REGULAR size for all other profiles. Sold in bags of 100.
	Fixing Screw Made from Blackened 304 Stainless Steel, 40mm 6G with a No1 square drive head. The head size has been designed to be easily unscrewed from between the boards without causing damage, if required. Use of your drill on low torque and leaving screws loose until the next board is in position is recommended. Sold in bags of 100.
	Base Boards 130mm x 10mm Designed to cover decking substructure if a plank is not used. Must be installed when warmed up in the sun and glued and screwed at 300mm intervals. We recommend Holdfast Carbond Glue – contact us for availability.