Care and Maintenance

Keep it clean and your HYBRIDECK with reward you with years of low maintenance pleasure.
General cleaning with a broom or mop will suffice for most situations, however if you want to give a better clean a dilute solution of sugar soap and warm water and scrubbing brush can be used.

If damp leaves are allowed to build up or the deck is in a shaded damp site mould or mildew may develop. This can be treated with diluted “wet & forget” following the manufacturers instructions. To get a faster result Intergrain Reviver or similar oxalic acid based cleaner is another option.

HYBRIDECK, like wood, is susceptible to stains from BBQ grease, oil, and the tannin in some vegetation.

Best results are achieved if the stain is treated immediately with absorbent cloths then apply a degreaser as per the manufacturers instructions. Follow up with a general clean with sugar soap and warm water.

Scratches can be removed with a light sand using 80 – 100 grit sandpaper, following the grain of the wood. The colour and texture changes which occur after this will recede with weathering.

Initially the deck will appear to be leaching and waterstaining. This is a weathering process which takes around three months to settle down. To accelerate this process scrub the deck down with Intergrain Reviva. After the first summer the colour will have lightened up10% to 20% and then will remain stable.

Being a recycled product colour variation of up to 8% from board to board can be expected.

We suggest a mat under your BBQ to protect from grease stains, and plastic protectors under metal furniture or planters to prevent gouging and potential rust stains.

Avoid dragging heavy items over the deck as it will scratch. Scratches can be dealt with by giving a light sand, following the grain of the wood as described above.

Test any treatment, cleaning products or sanding on a spare or obscured piece of decking to check for changes first.

After any cleaning hose off and use an old towel wrapped around your deckscrub or a rubber scraper to remove the excess water.

On a warm day the deck should dry with no water marks in a few moments.